From The Service Team at Deery Brothers JEEP of Waukee, Iowa: Here’s a step-by-step guide to installing a Start/Stop Eliminator on your Jeep. This guide assumes you’re using a plug-and-play eliminator like the Autostop Eliminator, which is one of the most popular and reliable options. Click Here to purchase.
🔧 Tools & Materials Needed
- Start/Stop Eliminator module (make sure it matches your exact Jeep model/year)
- Trim removal tool or flathead screwdriver (optional, but helpful)
- Flashlight (optional)
âś… Compatibility Check
Before installation, confirm:
- Your Jeep model and year are supported by the module (Wrangler JL, Gladiator JT, Grand Cherokee WK2, etc.)
- The module is designed specifically for your vehicle’s Start/Stop system—not a universal one
🚗 Installation Instructions (Autostop Eliminator – Wrangler JL/Gladiator JT Exampl
1. Turn Off the Jeep
- Make sure the engine is off and the keys are removed.
- For push-button start models, turn off the ignition fully (don’t leave it in accessory mode).
2. Access the Dash Panel
- Locate the Start/Stop button panel—this is the section of the dash that contains the “A” button.
- Use a trim tool or your fingers to gently pull the panel outward from the edges.
- It pops off with light pressure—don’t force it.
3. Unplug the OEM Harness
- Behind the panel, find the connector attached to the Start/Stop button module.
- Press the release tab and disconnect the wiring harness from the back of the switch assembly.
4. Install the Eliminator
- Plug the Start/Stop Eliminator module into the factory wiring harness.
- Then plug the other end of the eliminator into the back of the Start/Stop button.
âś… It’s essentially a “Y” connection—your new module sits between the factory harness and the original button.
5. Tuck and Close
- Tuck the wiring and module securely into the dash so it doesn’t rattle or interfere with anything.
- Snap the dash panel back into place carefully, pressing evenly until it’s flush.
6. Test It Out
- Start your Jeep.
- The “A” light should automatically turn off without you pressing anything.
- The system will now remember your preference permanently—even after shutdowns or battery disconnects.
🧼 Optional Tips
- Keep the original packaging in case you want to uninstall later.
- These devices don’t affect your warranty, but if you go in for service, you can easily unplug it beforehand.
🧠Done!
Your Jeep will now start with Auto Start/Stop OFF by default, and you can still manually turn it back on anytime with the dashboard button.
Deery Brothers JEEP RAM of Waukee
Deery Brothers JEEP, RAM, Chrysler, Dodge Dealership serving the Waukee – Des Moines, IA Region. New & Used Inventory Arriving Daily. Jeep Grand Cherokee, Jeep Compass, Wrangler, RAM 1500 Trucks, and Heavy Duty Ram 2500 and 3500 Trucks are ready to Test Drive. Schedule Service at Our MOPAR Certified Service Department. Check our New JEEP RAM Dealership Near Des Moines, IA located at 1000 W Hickman Rd, Waukee, IA 50263. Call For Monthly JEEP RAM Finance & Lease Specials 515-526-5903.
